|
|
 |
|RPN6B Safety Relief Valve|RPF12 Safety Relief Valve|RPF13 Safety Relief Valve|
|RPC14 Relief Valve|R101-1BHA Relief Valve| |
■RPN6B Safety Relief Valve (332KB) |
 |
For pressure vessel and piping protection
Size : 25〜200A
Fluid : Steam, gases, liquids
Set pressure : 0.05〜2.0MPa
Max. temperature : 205, 220, 300℃
| Material : | BodyーFC, SCPH, SCS
|
| Valve disc/seatーSUS
|
Connection : Flanged
| • | Full bore, large capacity
|
| • | High erosion-resistance due to STELLITE-faced valve disc and valve seat
|
| • | Easy adjustment by single ring
|
| • | Simple construction for easy maintenance
|
|  |
 |
 |  |  |
|
|
■RPF12 Safety Relief Valve (212KB) |
 |
For pressure vessel and piping protection
Size : 15〜80A
Fluid : Steam, gases, liquids
Set pressure : 0.02〜2.0 MPa
Max. temperature : 205,220℃
| Material : | BodyーFC, SCPH, SCS
|
| Valve disc/seatーSUS
|
Connection : Flanged
| • | Lift type
|
| • | Easy adjustment by single ring
|
|  |
 |
 |  |  |
|
|
■RPF13 Safety Relief Valve (164KB) |
 |
For pressure vessel and piping protection
Size : 15〜40A
Fluid : Steam, gases, liquids
Set pressure : 0.02〜1.6MPa
Max. temperature : 205, 220℃
| Material : | BodyーFC
|
| Valve disc/seatーSUS
|
Connection : Screwed
| • | Lift type
|
| • | Easy adjustment by single ring
|
|  |
 |
 |  |  |
|
|
To the top of this page |
■RPC14 Relief Valve (184KB) |
 |
For thermal relief, water supply and pump by-pass
Size : 15〜80A
Fluid : Liquids
Set pressure : 0.04〜2.0MPa
Max. temperature : 205℃
| Material : | BodyーFC, SCPH, SCS
|
| Valve disc/seatーSUS
|
Connection : Screwed, Flanged
| • | No chattering by dash-pot
|
| • | Best for pump by-passing and for continuous blowing
|
|  |
 |
 |  |  |
|
|
■R101-1BHA Relief Valve (136KB) |
 |
For hot/cold water tank and pump by-pass
Size : 15〜40A
Fluid : Hot and cold water
Set pressure : 0.05〜1.6MPa
Max. temperature : 100℃
| Material : | BodyーCAC
|
| Valve discーSynthetic rubber
|
Connection : Screwed, Flanged
| • | No malfunction caused by disc sticking because of no sliding parts on wet surface.
|
| • | Can be installed in any position.
|
| • | No leakage due to special synthetic rubber disc
|
| • | Can be used in both continuous and intermittent operations.
|
|  |
 |
 |  |  |
|
|
To the top of this page |
|